Gasification

Other Gaseous Feedstocks

Refinery Gas. Refinery gas has been used as a feedstock for partial oxidation. Although partial oxidation cannot usually compete with steam reforming for hydrogen production from natural gas, the situation can be different with a refinery gas feed. Refinery waste gas streams can contain considerable quantities of olefins, which would need to be hydrogenated upstream of a steam reformer. The partial oxidation route is not sensitive to the presence of unsaturates in the feed, and this flexibility can provide opportunities (Ramprasad etal. 1999).

Attention needs to be paid to the issues of metal dusting and methanation as with natural gas, but if there is no sulfur in the feed, then other solutions are possible, such as using a quench reactor if hydrogen is to be the end product.

FT Off-Gas. Fischer-Tropsch off-gas is essentially similar to many refinery off-gas streams in that it can contain significant quantities of unsaturated hydrocarbons. The same considerations apply. Where the main syngas generation for the FT synthesis is partial oxidation of natural gas, one only needs to be careful with the recycle of inerts (Higman 1990). This is, however, a limitation imposed by the synthesis process and not by the partial oxidation itself.

Coke Oven Gas. There are two recorded plants using coke oven gas as a feedstock. Coke oven gas is available only at low pressure. This makes the economics unfavor­able in all but the most exceptional cases.

Gasification

Liquid Wastes

Organic Chemical Waste. Organic wastes from chemical production vary as widely as the processes from which they originate. One published example is the feedstock to a waste gasification plant at …

Carbon Management

In the Texaco process, soot is extracted from the carbon-water mixture with naphtha and recycled with the feedstock to the reactor where it is gasified to extinction. The black water …

Common Issues

Operating Temperature Any fluid bed depends on having the solid particles of a size that can be lifted by the upward flowing gas. A large portion (over 95%) of the …

Как с нами связаться:

Украина:
г.Александрия
тел./факс +38 05235  77193 Бухгалтерия

+38 050 457 13 30 — Рашид - продажи новинок
e-mail: msd@msd.com.ua
Схема проезда к производственному офису:
Схема проезда к МСД

Партнеры МСД

Контакты для заказов оборудования:

Внимание! На этом сайте большинство материалов - техническая литература в помощь предпринимателю. Так же большинство производственного оборудования сегодня не актуально. Уточнить можно по почте: Эл. почта: msd@msd.com.ua

+38 050 512 1194 Александр
- телефон для консультаций и заказов спец.оборудования, дробилок, уловителей, дражираторов, гереторных насосов и инженерных решений.