Gasification

Moderator

The most common moderator used in gasification processes is steam. The steam must have a minimum temperature corresponding to that of saturated steam at the pressure prevailing in the gasifier, otherwise condensation in the lines to the gasifier will occur. In general, steam is used that is superheated to a temperature of 30CM-00°C. At pressures above 40 bar this superheat is mandatory, since otherwise the steam becomes wet on expansion.

The use of carbon dioxide as a moderator is unusual but not entirely unknown. Some plants use it to influence the H2/CO ratio of the synthesis gas where carbon monoxide or a СО-rich gas is the product. A process has been published using an oxygen-blown gasifier for the production of pure carbon monoxide from coke, incorporating carbon dioxide as a moderator (Lath and Herbert 1986).

Where C02 is used as a transport gas for pulverized coal in entrained gasifiers, it will also act as moderator or part thereof.

Gasification

Liquid Wastes

Organic Chemical Waste. Organic wastes from chemical production vary as widely as the processes from which they originate. One published example is the feedstock to a waste gasification plant at …

Carbon Management

In the Texaco process, soot is extracted from the carbon-water mixture with naphtha and recycled with the feedstock to the reactor where it is gasified to extinction. The black water …

Common Issues

Operating Temperature Any fluid bed depends on having the solid particles of a size that can be lifted by the upward flowing gas. A large portion (over 95%) of the …

Как с нами связаться:

Украина:
г.Александрия
тел./факс +38 05235  77193 Бухгалтерия

+38 050 457 13 30 — Рашид - продажи новинок
e-mail: msd@msd.com.ua
Схема проезда к производственному офису:
Схема проезда к МСД

Партнеры МСД

Контакты для заказов оборудования:

Внимание! На этом сайте большинство материалов - техническая литература в помощь предпринимателю. Так же большинство производственного оборудования сегодня не актуально. Уточнить можно по почте: Эл. почта: msd@msd.com.ua

+38 050 512 1194 Александр
- телефон для консультаций и заказов спец.оборудования, дробилок, уловителей, дражираторов, гереторных насосов и инженерных решений.