INSTALLATION
Install the removed parts in the reverse order of removal.
AIR CLEANER HOUSING |
AIR CLEANER ELEMENT |
ELEMENT HOLDER |
CONNECTING BOOT |
I Apply Honda Bond A or Honda Handgrip Cement or equivalent |
MUDGUARD |
AIR CLEANER HOUSING |
Route the wires Install the air cleaner housing, collars and bolts.
Install the mud guard and tighten the screws securely.
Install the collar and bolt. Tighten the bolt securely.
Except 05 and ‘06 Connect the crankcase breather hose.
California type,
PAIR AIR SUCTION HOSE |
BREATHER HOSE |
BAND |
After 06
05 and '06 California type, After 06: |
Connect the crankcase breather hose and PAIR air suction hose.
Lower the sub-frame and connect the air cleaner connecting boot securely.
Tighten the sub-frame mounting bolts to the specified torque.
TORQUE (’05 - '07):
Upper: 30 N-m (3.1 kgf-m, 22 lbf-ft)
Lower: 49 N-m (5.0 kgf-m, 36 lbf-ft)
TORQUE (After '07):
BAND SCREW |
CASE COVER |
Upper/lower: 49 N-m (5.0 kgf-m, 36 lbf-ft)
Tighten the air cleaner connecting boot band screw securely.
Hook the air cleaner case cover and band securely to the fuel tank.
Install the following:
- Battery (page 17-6)
- Regulator/rectifier (page 17-8)
- Muffler ('05 - '07: page 3-9, After '07: page 3-11)
- Radiator shrouds (page 3-4)
- Side covers (page 3-3)
- Seat (page 3-3)