BOSTON FURNITURE

Mobility Aids

There is a growing amount of useful data related to movement and maneuvering, including information related to walking or moving with an assistive device (see Figures 4.7 to 4.1 0). Al­though this data seems less plentiful, Panero and Zelnik do offer minimal parameters. Access guidelines such as those from the American National Standards Institute (ANSI), the International Codes Council (ICC), or Uniform Federal Accessibility Standard (UFAS) can be helpful. One criti­cal rule is to consider the person and the aid as one. Also, just as for a person who does not use a mobility aid, these figures increase when the person using an aid goes from a static position to motion.

Mobility Aids

Mobility Aids

FIGURE 4.8 The width of a walker will deter­mine the minimum clearance needed. (Based on Human Dimension & Interior Space by Julius Panero and Martin Zelnik, 1979, Watson-Gup - till Publications, p. 54.)

 

Mobility Aids

FIGURE 4.7 These minimum allowances will help In planning spatial clearance. Note that In this case, using the larger dimensions of percentile of adult males provides clearances for any human of smaller dimensions as well. (Based on Human Dimension & Interior Space by Julius Panero and Martin Zelnik, 1979, Watson-Guptill Publications, p. 54.)

 

Mobility Aids

Mobility Aids

FIGURE 4.9 in this case, the clearance dimen­sions must be based on the actual user and dog, but the given dimension of 30 inches (762 mm) could be used as an absolute minimum. (Based on Human Dimension & interior Space by Julius Panero and Martin Zelnik, 1979, Watson-Guptill Publications, p. 54.)

 

Mobility Aids

FIGURE 4.10 Although these standards for a person using a chair are useful in general, it is much better to measure the person in his or her chair. The variables are impacted by the person's size and ability as well as the design and fit of the chair.

 

Mobility Aids

Comfort Zone

Based on psychological factors, we can also identify a body buffer zone or comfort zone. We maintain this personal space between ourselves and others who are walking, talking, or just stand­ing with us (see Figure Figure 4.11) While we maintain a greater distance with strangers, the personal or close zone will be most applicable to bathroom design.

Anthropometry of Children

Historically there has been very little anthropometric data available regarding children. However, given the growing national focus on childhood health and safety, we can expect this to change. Although functional data would be most applicable, body dimensions of children are available and can be a starting point for the design of child-oriented spaces (see Table 4.2)

Mobility Aids

Подпись: 24" (610 mm) SHOULDER BREADTH FiGURE 4.11 Based on a shoulder breadth of 24 inches (610 mm) and a body depth of 18 inches (457 mm), a minimum area of approximately 3 square feet (914 mm) per person is a guide in planning a space to be shared. (Based on Human Dimension & Interior Space by Julius Panero and Martin Zelnik,

1979, Watson-Guptill Publications, p. 41.)

TABLE 4.2 the Height and Breadth of Children, Both Standing and Seated, Can Be Useful Dimensions When Planning a Bathroom That Must Accommodate Them as They Grow

Stature (Height)

6 years

11 years

95th Percentile

Boys

50.4" (1280 mm)

61.8" (1570 mm)

Girls

49.9" (1267 mm)

62.9" (1598 mm)

5th Percentile

Boys

43.6" (1107 mm)

53" (1346 mm)

Girls

42.6" (1083 mm)

53.3" (1354 mm)

Sitting Height

6 years

11 years

95th Percentile

Boys

27.4" (695 mm)

31.7" (805 mm)

Girls

27.1" (688 mm)

32.8" (833 mm)

5th Percentile

Boys

23.7" (602 mm)

27.6" (701 mm)

Girls

23.1" (588 mm)

27.4" (697 mm)

Elbow-to-Elbow Breadth

6 years

11 years

95th Percentile

Boys

11.3" (288 mm)

14.7" (373 mm)

Girls

11.1" (281 mm)

14.7" (373 mm)

5th Percentile

Boys

8.5" (217 mm)

10.1" (257 mm)

Girls

8.3" (211 mm)

9.6" (244 mm)

Hip Breadth

6 years

11 years

95th Percentile

Boys

9.3" (236 mm)

12" (305 mm)

Girls

9.3" (236 mm)

13.3" (338 mm)

5th Percentile

Boys

7.1" (181mm)

8.7" (221 mm)

Girls

7.1" (181 mm)

8.8" (223 mm)

Popliteal Height (to knee from floor when sitting)

6 years

11 years

95th Percentile

Boys

12.8" (325 mm)

16.3" (414 mm)

Girls

12.6" (320 mm)

16.4" (417 mm)

5th Percentile

Boys

10.4" (264 mm)

13.3" (338 mm)

Girls

10.2" (259 mm)

13.1" (333 mm)

Buttock- Popliteal Length (wall to back of knee when sitting)

6 years

11 years

95th Percentile

Boys

14.7" (374 mm)

19" (483 mm)

Girls

15.2" (386 mm)

19.9" (505 mm)

5th Percentile

Boys

11.3" (287 mm)

14.5" (368 mm)

Girls

11.3" (287 mm)

15" (381 mm)

BOSTON FURNITURE

Dimensions (Forms 7 through 10)

Accurate dimensions of the existing space are critical for a renovation project. This is also true for any fixtures or structural elements that will remain in the newly designed space …

THE JOBSITE

Before you can begin the actual design, you have one more major assessment. This is of the jobsite. Structurally and mechanically, you need to know if you can make your …

Client’s Preferences and specifications

Many clients think and dream about a bathroom project before it becomes a reality. They read shelter magazines, visit showrooms, and surf the Internet. Many have a file of ideas …

Как с нами связаться:

Украина:
г.Александрия
тел./факс +38 05235  77193 Бухгалтерия

+38 050 457 13 30 — Рашид - продажи новинок
e-mail: msd@msd.com.ua
Схема проезда к производственному офису:
Схема проезда к МСД

Партнеры МСД

Контакты для заказов оборудования:

Внимание! На этом сайте большинство материалов - техническая литература в помощь предпринимателю. Так же большинство производственного оборудования сегодня не актуально. Уточнить можно по почте: Эл. почта: msd@msd.com.ua

+38 050 512 1194 Александр
- телефон для консультаций и заказов спец.оборудования, дробилок, уловителей, дражираторов, гереторных насосов и инженерных решений.