STARTER SWITCH
|
'05 - '07: |
|
|
Remove the front visor.
- '05 -'07: (page 3-5)
- After '07: (page 3-6)
Disconnect the starter switch 2P (Black) connector.
|
STARTER SWITCH |
Check for continuity between the starter switch connector terminals (Yellow/red and Black).
There should be continuity with the starter switch pushed and no continuity with the switch released.
|
|
Remove the front visor.
- '05 - '07: (page 3-5)
- After '07: (page 3-6)
Loosen the lock nut and disconnect the tripmeter cable.
'05- '07: Remove the nuts, washers and tripmeter.
After ‘07 Remove the nuts, cable guide and tripmeter.
Installation is in the reverse order of removal.
