BRAKE PEDAL
|
PIVOT BOLT |
|
|
Remove the clip, brake pedal pivot bolt, washer and dust seals.
|
COTTER |
|
BRAKE PEDAL |
|
JOINT PIN |
|
|
Remove the return spring.
Remove and discard the cotter pin. Remove the joint pin and brake pedal.
Connect the brake pedal to the push rod. Install the joint pin and a new cotter pin.
Install the dust seals with their lip side facing out to the brake pedal.
|
WASHER DUST SEALS |
|
PIVOT BOLT,— |
|
|
Apply grease to the sliding surface of the brake pedal and pivot bolt.
Install the washer and pivot bolt.
Tighten the brake pedal pivot bolt to the specified torque.
TORQUE: 36 N m (3.7 kgf-m, 27 lbf-ft)
Install the brake pedal clip securely.
Install the return spring
