The Technique of FURNITURE MAKING

Butler’s trays

This old form of carrying tray was usually made in two forms: a tall variety on X legs with a turned centre spindle connecting the legs, and the low stool variety illustrated in 529. The

528 Preformed tray with bent plywood base and solid sides and ends. Designed by Ernest Joyce MSIA

former were about 29 in (737 mm) high and the latter 18 in (457 mm) high, with an elliptical top about 39 in (981 mm) by 30 in (762 mm) when fully opened. The fixed top was usually panelled to prevent casting, but modern versions are veneered plywood, etc. with the wings in carefully matched solid wood. The ellipse should be laid out as described under Workshop geometry, Chapter 40, and the wings are connected with ordinary back flap hinges. If the hinges work too easily, allowing the wings to fall from the upright carrying position, they can be set very fractionally askew to stiffen the movement. The stool is framed up in the orthodox manner and the top secured with shrinkage plates. Figure 529:1 shows the tray in the carrying position and 529:2 with the wings down.

Добавить комментарий

The Technique of FURNITURE MAKING

ESTIMATING THE COST OF MAN-HOURS IN HANDWORK

Where no previous records are available the proprietor must assess his own capabilities and those of his employees. Common joinery items are usually in softwood of fairly large dimensions, with …

Costs of man-hours

The total cost of man-hours at the rates paid, plus overtime rates where applicable, plus health insurance, pensions, paid holidays, etc. have to be considered. Here again these may be …

Appendix: Costing and estimating

Costing is the pricing of completed work taking into account not only all the direct expenses— materials, wages and insurances, fuel and power, machining costs, workshop expenses, etc.—but also a …

Как с нами связаться:

Украина:
г.Александрия
тел./факс +38 05235  77193 Бухгалтерия

+38 050 457 13 30 — Рашид - продажи новинок
e-mail: msd@msd.com.ua
Схема проезда к производственному офису:
Схема проезда к МСД

Партнеры МСД

Контакты для заказов оборудования:

Внимание! На этом сайте большинство материалов - техническая литература в помощь предпринимателю. Так же большинство производственного оборудования сегодня не актуально. Уточнить можно по почте: Эл. почта: msd@msd.com.ua

+38 050 512 1194 Александр
- телефон для консультаций и заказов спец.оборудования, дробилок, уловителей, дражираторов, гереторных насосов и инженерных решений.