АНГЛИЙСКИЙ ДЛЯ СВАРЩИКОВ

Welding Education and Consultation Training Centre

Course

Course Objectives

Course Outlines

Welding

The main objective of this

Materials properties related to

Design

course is to introduce welding engineers to the subject of welding design.

welding. Welding process selection. Types of welded joints. Welding Accessibility

Many factors have to be considered in this issue. These factors include: consumer requirement, technical specifications, and environmental and economical constrains

and Inspection. Economical Analysis. Design information. Welding symbols. Case studies.

Welding

Fundamentals

The main objective of this course is to familiarize engineers and inspectors to various aspects related to welding techniques, inspection and quality procedures in welding industry. The course is designed for engineers of scientists with no or little experience in the welding field.

Welding processes: Shielded metal Arc welding, Arc welding, Gas tungsten Arc welding, Submerged Arc welding & Oxyfuel welding & electric resistance. Cutting processes: Oxygen cutting, plasma cutting and laser cutting. Inspection of weldments: Nondestructive testing of welments. Mechanical testing of weldments (tensile, bending, impact).

Welding

Inspection

The course discusses both qualification inspections and on-line inspections of welded joints. These include mechanical tests (tension, bending, impact, ...etc, and non destructive tests.

Significance of weld discontinuities. Welding inspection (non-destrutive testing techniques: surface inspection, magnetic particle, volumetric, radiography, and ultrasonic). Destructive testing techniques: hardness, tension, bending, ...etc. The control of quality during shop operations. The control of quality during site welding.

Non

Destructive

testing

Certification:

Level I: Is to train inspectors to be able to pass level I examination and to be able to inspect using the chosen

Physical principals of test. Processing. Test equipment and materials. Codes, standards, procedures and

Magnetic Particle & Liquid Penetrant Testing (MT & PT)

technique. Level II: Is to upgrade level I inspectors to be able to pass level II examination and to be able to inspect, write a report, etc in the chosen technique.

safety. Test physical principals. Equipment and radiation source. Radiographic recording. Work parameters and conditions. Defectology. Selection of techniques. Test methods according to standards. Personal safety and protection.

Welding

Metallurgy

The course delineates the main changes in the microstructure and/or the morphology of the metals and alloys during welding that lead to changes in properties. Alloys discussed in the course include all types of steels, Cast Iron, Nickel, Copper alloys, ...etc

Heat flow in welding. Effect of pre-and-post weld heat treatment. Introduction to welding metallurgy (hardenability and weldability). Metallurgy of steels. Welding of ferrous alloys: Carbon-steels, Low alloy steels, Stainless steels, and Cast Iron. Welding of non ferrous alloys: Al - Ni - and Cu-alloys. Identification and specifications of welding filler metals. Case studies.

Welding

Quality

Assurance

For each application, the welding process is controlled by specific code or standard. The course includes discussions of ASME boiler and pressure vessel code AWS steel structure code and other standards.

Welding co-ordination: tasks & responsibility. Quality requirements for welding. Qualification of welding procedures and welders. International codes and standards. Mechanical testing of welds. Non-destructive testing of welds. Documents for weld quality assurance. Case studies.

Welding

Techniques

Selection of the welding process is very important. The course discusses the variables of each welding process and gives directions for selecting the proper

Overview of welding techniques and processes. Conventional techniques: arc, Oxy fuel and resistance welding. Non-conventional: plasma, electron beam, laser

process for specific application. Welding processes discussed include: SMAW, GMAW, GTAW, etc.

welding. Flame and arc cutting of metals. Computer applications in welding. Case studies.

AWS

Certified

welding

Engineer

The highest level of certification in the field of welding

To get certified as a welding engineer you need to attend four exams: Fundamentals of science. Applied science. Fundamentals of welding. Applied welding.

Translate the following sentences into Russian:

1. Кислородная, плазменная и газовая резка изучаются в курсе «Основы сварочного производства».

2. Методика проведения разрушающих испытаний изучается в курсе «контролер сварочного участка» («приемщик сварочных изделий»).

3. К традиционным типам сварки относятся: электродуговая, кислородно-газовая и контактная электросварка.

4. Каждый сварщик должен знать правила личной безопасности и использовать индивидуальные средства (equipment) защиты, а также разбираться в международных кодах и стандартах.

5. Во время сварки происходит изменение микроструктуры металла, что приводит к изменению его свойств.

6. При проведении монтажных сварочных работ особенно важно контролировать качество шва.

Writing

Write a short summary about a welder’s competence. Cover the following areas:

- welding courses welders can take;

- types of welding welders should be able to use,

- testing techniques welders should know about.

Lead-in

Before you read, think of the following questions:

1. What does it mean to be a surface welder?

2. When does it become necessary to weld underwater?

3. Do you consider underwater welding an interesting career opportunity?

Vocabulary

plunge

take the plunge commercial

прыжок, ныряние, погружение (в воду или другую среду) сделать решительный шаг

subsea

rigging

fitter

alignment

beveling

stripping

patch

scuba diver

physical

(examination)

oxyfuel

draft

lapse

1) коммерческий, торговый; 2) промышленный 3) рентабельный, прибыльный Syn: profitable 4) технический

погруженный в воду, подводный 1) оснастка, 2) сборка, регулировка, установка, монтаж (конструкций, оборудования и т. д.) 3) оборудование, оснащение, снаряжение сборщик, слесарь-сборщик выверка, выравнивание, регулировка разделка кромок

сдирание, обдирание; зачистка; снятие верхнего слоя заплата

лёгкий водолаз, аквалангист врачебный/медицинский осмотр

горючая смесь газов делать чертеж, проектировать юр. прекращение, недействительность права (на что-л.)

While-reading activity

Think of the answers to the following questions:

1. How can you communicate to your company?

2. What can be a source of helpful information for a welder?

3 . Who can be called a certified welder?

4. How do people apply for employment?

5. What professions are physical demanding?

6. What kind of career goals may a welder have?

7. What is formal training?

Give the Russian equivalents for the word combinations in italics in the text

АНГЛИЙСКИЙ ДЛЯ СВАРЩИКОВ

Полная лингвистическая поддержка бизнеса от «Мастер перевода. Ру»

Взять все проблемы клиента на себя - основной секрет 15 летнего успешного роста от masterperevoda.ru

Курсы английского – успешное будущее

Владение иностранными языками — это возможность открыть множество вариантов самореализации и достичь больших успехов. Наиболее универсальным является английский язык, которым владеет подавляющее большинство людей во всем мире. Это уникальный язык …

КЛАССИФИКАЦИЯ ВИДОВ И СПОСОБОВ СВАРКИ

Таблица 1. Классификация сварки металлов по ГОСТ 19521-74 Класс сварки Определение Вид сварки Термический Виды сварки, осуществляемы плавлением с использованием тепловой энергии дуговая, электрошлаковая, электронно-лучевая, плазменно-лучевая, ионно-лучевая, тлеющим разрядом, световая, …

Как с нами связаться:

Украина:
г.Александрия
тел./факс +38 05235  77193 Бухгалтерия
+38 050 512 11 94 — гл. инженер-менеджер (продажи всего оборудования)

+38 050 457 13 30 — Рашид - продажи новинок
e-mail: msd@msd.com.ua
Схема проезда к производственному офису:
Схема проезда к МСД

Оперативная связь

Укажите свой телефон или адрес эл. почты — наш менеджер перезвонит Вам в удобное для Вас время.